User guide

16
10. Check that the ‘O’ seal is fitted inside
the backplate nut. Fit the olive and the
backplate nut over the copper pipe and
tighten the nut.
11. Check that the second ‘O’ seal is fitted
to the outside of the backplate nut.
Press the elbow onto the backplate,
make sure that the clips on the elbow
engage with the backplate.
12. Press the shroud over the elbow, make
sure that it engages with the lugs on
the backplate.
13. Fit the slide bar, handset and soap dish
refer to section: Mira Logic Exposed
Variable Shower Fittings (ev).
Olive
Backplate Nut
‘O’ Seal (Inside)
Elbow
Clips
‘O’ Seal (Outside)
Shroud