User guide

18
6. Remove the mounting plate/backplate
assembly from the wall.
7. Separate the backplate and the
mounting plate.
8. Drill the four mounting plate holes and
fit the wall plugs supplied.
9. If necessary, make a recess 6 mm
deep to accept the mounting plate.
10. Fit the mounting plate to the wall with
the four mounting plate screws
supplied. The two threaded holes must
be horizontal.
11. Temporarily fit the two backplate
screws into the mounting plate. This
will prevent the fixing holes from
becoming blocked with plaster or
grout.
12. Finish the surface of the wall as
required.
13. Remove the two backplate screws
from the wall.
14. Fix the backplate to the wall using the
two backplate screws.
15. Fit the olive over the copper pipe and
tighten the backplate nut into position.
Backplate
Backplate
Screws
Olive
Copper Pipe
Backplate Nut
6 mm
Mounting Plate
Backplate
Screws