User guide

MAINTENANCE

Cleaning

Many household cleaners contain abrasives and chemical substances, and should

not be used for cleaning plated or plastic fittings. These finishes should be cleaned

with a mild washing up detergent or soap solution, and then wiped dry using a soft

cloth.

Spray Plate Assembly - External

1. Use your thumb or a soft cloth to wipe

any limescale from the soft rubber

nozzles and the front face of the spray

plate assembly.

Spray Plate Assembly - Internal

1. Remove the spray plate assembly.

Refer to section: Maintenance, High

Capacity Nozzle Ring Installation.

2. Clean all the components with a stiff

brush. If necessary use a plastic kettle

descalent in accordance with the

manufacturer's instructions. Flush

thoroughly with water before the

shower is used.

3. If necessary replace the 'O' seals.

Refer to section: Spare Parts.

4. Refit the components in reverse order.

Make sure that the 'O' seals and the

inner and outer nozzle retaining rings

are fitted correctly. Refer to section:

Maintenance, High Capacity Nozzle

Ring Installation.

'O' Seals

Adjuster Ring

Spray Plate

Assembly

Handset Body

Assembly

Outer Nozzle

Ring Retainer

Inner Nozzle

Ring Retainer