User guide

25
High Capacity Nozzle Ring Installation
1. Turn the adjuster ring fully
anticlockwise.
2. Unclip and remove the adjuster ring.
3. Unscrew the spray plate assembly in
an anticlockwise direction. The ‘O’
seals will provide some resistance.
4. Remove the inner and outer nozzle
retaining rings.
5. Replace the inner and outer nozzle
rings with the high capacity versions
supplied.
6. Ensure that the four ‘O’ seals are
correctly fitted.
7. Fit the inner nozzle retaining ring on
the spray plate assembly.
8. Fit the inner nozzle retaining ring on
the spray plate assembly.
9. Turn the flow divertor fully clockwise.
10. Carefully screw the spray plate
assembly onto the flow divertor.
11. Align the inner teeth on the adjuster
ring with the teeth on the handset flow
divertor. Clip the adjuster ring into
position.
Spray Plate
Assembly
Inner Nozzle
Retaining Ring
Outer Nozzle
Retaining Ring
Inner Nozzle Ring
Outer Nozzle Ring
Spray Plate
Assembly
‘O’ Seals
Adjuster Ring