Classic Shower Fittings Installation and User Guide These instructions are to be left with the user 1
Contents Introduction.............................................................................................. 3 Important Safety Information.................................................................. 3 Guarantee.................................................................................................. 4 Guarantee............................................................................................. 4 Patents and Design Registration...................................................
Introduction Thank you for purchasing a quality Mira product. To enjoy the full potential of your new product, please take time to read this guide thoroughly, having done so, keep it handy for future reference. Classic Shower Fittings An adjustable Showerhead with four different spray actions (rain, cloud, storm and burst), supplied complete with Shower Hose, Clamp Bracket, Slide Bar Supports, and a Hose Retaining Ring. These shower fittings are designed for use with all Mira products.
Guarantee Guarantee For domestic installations, Mira Showers guarantee the Mira Classic Shower Fittings against any defect in materials or workmanship for a period of one year from the date of purchase For non-domestic installations, Mira Showers guarantee the Mira Classic Shower Fittings against any defect in materials or workmanship for a period of one year from the date of purchase. For terms and conditions refer to the back cover of this guide.
Pack Contents Tick the appropriate boxes to familiarise yourself with the part names and to confirm that the parts are included. q 2 x Slide Bar Securing Screws q 1 x LC Spray Plate q 1 x Showerhead q 1 x Slide Bar Assembly q 2 x Hose Seals q 1 x Template q 1 x Shower Hose 1.25 m chrome q 2 x Fixing Screws q 2 x Wall Brackets q 2 x Wall Plugs q 2 x End Plugs q 1 x 3mm Hex Wrench q 1 x 2.
Dimensions 150 mm 82 mm 650 mm 600 mm 82 mm 6
Specifications Pressures Minimum maintained pressure: 0.1 bar (10 kPa). Maximum maintained pressure: 5.0 bar (500 kPa). Warning! Exceeding the stated maximum maintained pressure could result in excessive spray forces and possible damage to the product. Installation Requirements Installation must be carried out in accordance with these instructions, and must be conducted by designated, qualified and competent personnel. 1.
Installation Note! For dry lined, stud partition, shower cubicle or laminated panel walls the installer may wish to obtain alternative proprietary cavity fixings. Use of these alternative fixings is beyond the scope of this guide. Read the section: Installation Requirements before proceeding with the installation. The slide bar should be positioned to one side of the shower control at a convenient height for all the family.
5. 6. Screw the shower hose onto the showerhead and the outlet of the shower (Make sure the hose seals are fitted). Do not overtighten. Place the showerhead into the clamp bracket and adjust its height as desired.
Operation Changing the Spray Setting The Classic Showerhead has four different spray actions:- Rain, Cloud, Storm and Burst. The showerhead features a rotating head to enable differing spray patterns to be achieved, turn the showerhead in the direction shown to activate the different spray patterns.
Height Adjustment. The height of the showerhead is easily adjusted by gently moving the clamp bracket either up or down the slide bar until the required height is achieved.
Maintenance Cleaning Many household cleaners contain abrasives and chemical substances, and should not be used for cleaning plated or plastic fittings. These finishes should be cleaned with a mild washing up detergent or soap solution, and then wiped dry using a soft cloth. Spray Plate Assembly - External 1.
Fault Diagnosis The trouble shooting information tabled below gives details on what you can do as a user, should you encounter difficulties with the shower fittings whilst operating the shower. Before replacing any parts make sure that the underlying cause of the malfunction has been resolved. Malfunction No flow or low flow rate from shower fittings. Cause Remedy Spray plate blocked. Refer to section 'Maintenance, Cleaning'. Hose blocked or twisted.
575.09 575.12 632.73 1603.104 1688.160 1688.162 1688.164 1688.166 1688.168 1688.185 1688.187 1688.188 1688.190 1688.193 1688.200 1688.275 Spare Parts Hexagonal Wrench - 3 mm Hexagonal Wrench - 2.5 mm (not illustrated) Hose Seal (x2) Shower Hose 1.
NOTES 15
Customer Service Guarantee of quality Mira Showers guarantee your product against any defect in materials or workmanship, provided that it is installed and maintained in accordance with the instructions given in this guide. to validate the guarantee, please return your completed registration card within 30 days of product installation. within the guarantee period we will resolve defects, free of charge, by repairing or replacing parts or modules as we may choose.
