User guide
12
MAINTENANCE
Cleaning
Many household cleaners contain abrasives and chemical substances, and should
not be used for cleaning plated or plastic ttings. These nishes should be cleaned
with a mild washing up detergent or soap solution, and then wiped dry using a soft
cloth.
Spray Plate Assembly - External
1. Use your thumb or a soft cloth to wipe
any limescale from the soft rubber
nozzles and the front face of the
spray plate assembly Important! The
sprayplate must be regularly cleaned
to make sure that the handset does
not become blocked..
Cloud Spray Plate Assembly
This product is supplied congured for the majority of showering systems including
electric showers.
Note! For showers with a pressure of below 0.15 bar (1.5 metre head) it will be
necessary to change the Cloud sprayplate assembly for the LC (Low Capacity)
version to achieve a suitable spray pattern.
Caution! The LC sprayplate must not be
used on electric showers
1. Use a suitable tool to remove the
grommets.
2. Using the 2.5 mm hexagonal wrench
(supplied), remove the screws.
3. Separate the sprayplate assembly
into its individual components.
4. Repla c e the Cloud a s sembly
sprayplate with the LC version.
5. Reassemble the components in
reverse order.
Grommets
Seals
Seals
Screws
Low Capacity
Sprayplate (LC)