User guide

12
16. Attach the hose onto the handset.
Make sure that the hose washer is
tted and do not overtighten.
17. Pass the hose through the hose
retaining ring and soap dish (if tted).
18. Attach the hose to the outlet of the
shower control. Make sure that the
hose washer is tted.
19. Place the handset into the clamp
bracket.
Wall Mounted Handset Holder
(Advance Flex Only)
1. The shroud must be removed to
x the handset holder to the wall.
Ensure the swivel insert is in the
horizontal position before removing
the shroud.
2. Using the swivel insert holder as a
guide, mark the position of the two
screw holes.
3. Drill two 8mm holes and insert the wall
plugs provided.
4. Screw the swivel insert holder to the
wall using the screws provided. It may
be necessary to remove the swivel
insert to t the holder. Ensure the
insert is retted as originally supplied
or the handset will not t correctly in
the holder.
5. With the swivel insert in the horizontal
position, push t the shroud until it
'locks' into position.
Shroud
Swivel Insert
Swivel Insert Holder
Screws