User guide

15
Cleaning
Many household cleaners contain abrasives and chemical substances, and should
not be used for cleaning plated or plastic ttings. These nishes should be cleaned
with a mild washing up detergent or soap solution, and then wiped dry using a soft
cloth.
1. To remove limescale, use your thumb
or a soft cloth to wipe any limescale
from the soft rubber nozzles and the
front face of the showerhead.
Spray Plate Assembly - Internal
1. Remove the spray plate assembly.
Refer to "Spray plate assembly -
removal and installation".
2. Remove the inner and outer nozzle
ring retainers.
3. Clean all the components with a stiff
brush. If necessary use a plastic
kettle descalent in accordance with
the manufacturer's instructions. Flush
thoroughly with water before the
shower is used.
4. If necessary replace the 'O' seals.
Refer to Spare Parts.
5. Refit the components in reverse
order. Make sure the 'O' seals, and
the inner/outer nozzle ring retainers
are tted correctly. Refer to "Spray
plate assembly - removal and
installation".
Outer Nozzel Ring
Retainer
'O' Seals
Inner Nozzel Ring
Retainer
Spray Plate
Assembly
Adjuster Ring
MAINTENANCE