User guide

16
1. Tu r n t h e a d j u s t e r r i n g f u l l y
anticlockwise.
2. Unclip and remove the adjuster ring.
3. Unscrew the spray plate assembly in
an anticlockwise direction. The 'O'
seals will provide some resistance.
4. Remove the inner and outer nozzle
retaining rings.
Handset Body
Assembly
Outer Nozzle
Retaining Ring
Inner Nozzle
Retaining Ring
Spray Plate
Assembly
Adjuster Ring
Outer Nozzle
Retaining Ring
Inner Nozzle
Retaining Ring
Spray Plate
Assembly
1. Make sure that the four 'O' seals are
all correctly tted.
2. Fit inner nozzle ring retainer on to
the spray plate assembly and t the
outer nozzle ring retainer on to the
ow divertor.
3. Tu r n t h e f l o w d i v e r t o r f u l l y
clockwise.
4. Carefully screw the spray plate
assembly onto the ow divertor.
5. Align the inner teeth on the adjuster
ring with the teeth on the handset ow
divertor. Clip the adjuster ring into
position.
Inner Nozzle
Retaining Ring
'O' Seal
Spray Plate
Assembly
'O' Seals
Outer Nozzle
Retaining Ring
Teeth
Inner Teeth
Spray Plate
Assembly
Adjuster Ring
Flow
Divertor
Spray Plate Assembly-Removal
Nozzle Ring Removal
1. Carry out instructions 1 to 4 of "Spray
Plate Removal".
2. Remove both the inner and outer low
capacity nozzle rings.
3. Carry out instructions 1 to 6 of "Spray
Plate Installation".
Spray Plate Installation