Installation Guide

PACKAGE CONTENTS + (4) Screws
BUILD A WALL
Hold a Board on the ground so it’s standing on edge with the notched ends to the
left and right. Slide a Corner Post down over one notched end of the Board. Next,
slide another Post over the other notched end. This forms a wall.
Repeat step one to complete a second wall.
BUILD A FRAME
Place the walls parallel to each other and connect them into a square with two
more Boards. This forms the frame of the Garden Bed.
Questions? Email [e-mail] or call 800-622-5510 Monday - Friday 8am-5pm EST
x12
FINISH GARDEN BED WALLS
Add one more Board, one at a time, directly on top of each existing Board in the
frame. Push the Boards down evenly between the tops of the Posts. If needed, tap
snugly into place with a rubber mallet.
MODEL #
RCMG4411COR
DIMENSIONS
4ft. wide x 4ft. long
x 11in. high
22.25 in. x 2.5in. x 2.5in.
Corner Posts
x4
4ft. x 1.25in.
Corral Slats
CEDAR RAISED GARDEN BED WITH CORRAL | ASSEMBLY INSTRUCTIONS
1.
2.
3.
x8
4ft. x 5.5in.
Boards
BUILD THE CORRAL
Slide one Spacer into the top of each Corner Post on top of each existing wall.
Push the spacers down so they are directly on top of the Boards. Next add
one Slat on top of the Spacers. Add more Spacers and Slats until all four
Corral walls are complete.
4.
ATTACH DECORATIVE CAPS
When the Corral is completed, attach each Decorative Cap to a Corner Post with a
screwdriver and Screw. We recommend drilling a pilot hole in each Cap first.
5.
x4
3.5in. x 3.5in.
Decorative Caps
x24
Corral
Spacers
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
[e-mail]
INSTALLATION SUPPORT
youtube.com/greenesfence
Create an ideal growing environment for your plants with Miracle-Gro raised bed soil and Miracle-Gro plant food.
Miracle-Gro® is a Registered Trademark of OMS Investments, Inc. and is used under license.