Installation Instructions

Eng
8
8
ASSEMBLY INSTRUCTIONS
We offer two types of Tumbling Composters: one with locking mechanism and the other without. The
assembly instructions for both are shown below.
Tools Required
Cutter pliers
Phillips Screwdriver
Tumbling Composter with Locking Mechanism
Preparations
1. Cut and discard cable ties holding axle and rods on frame (Figs A and B) and barrels
(Fig C, four places).
2. Unscrew both screws holding together the barrels (Fig D, two places).
3. Remove lock screws from barrels (Fig E, two places).
4. Remove inner barrel from installed barrel (Fig F).
5. Remove lid from removed inner barrel (Fig G).
6. Remove accessories located inside installed barrel (Fig H).
BA