User Manual

1
2
3
4
5
How to pair Bluetooth
Pair The Sing M200 with Bluetooth function on a smartphone.
The distance between speaker main unit and the phone needs to be 10M or less for good pairing.
If pairing fails, POWER off and restart the speaker and repeat the steps above.
If auto pairing is not supported for certain Smartphone model, please follow the following steps for pairing.
If pairing fails on at the first attempt, check pairings with other devices and release
all pairing, try pairing again.
If you want to pair with onother phone, release existing pairing and pair with another
phone with the following steps.
Do not pair devices where there is a warning of electromagnetic radiation such as hospital
or airplanes and where the use of the product is not permitted.
Noise or abnormal functioning happen due to obstacles such as a wall or partition.
When the Bluetooth pairing is disconnected, a confirmation sound occurs.
·
·
·
·
·
·
·
·
·
How to pair Bluetooth (This procedure is developed based on Android Smartphones.)
★ Please refer to How To Use for each device since some devices have different
setup procedure.
★ When POWER is on, the speaker is paired to most recently connected device.
Press and hold the POWER button at the side of The Sing M200 speaker main unit
for 3 seconds to POWER on the system. The Bluetooth connection is in ready status
with a confirmation sound.
(When POWER on, the speaker is paired to most recently connected device.)
Push the Bluetooth icon on the Smartphone(Android) to activate the Bluetooth, and
find the devices to add.
Find ‘miracle, M the Sing M200-Bt’ model in the device list.
(Push ‘Find’ button to search
the model if the model does not appear in the list.)
When conncected, a confirmation sound occurs.
Press and hold the ‘POWER’ button for 3 seconds after using. The system turns off with
a confirmation sound.
How to connect Bluetooth(Pairing)
You can use lock feature when you press and hold and together.
①
②
③
5
The battery level display shows the change of the battery.
The frequency signal status display shows the communication status between base speaker and MIC.
Information on upper status line and channel lock
*What is Lock Feature? A function to cut out interfering frequencies around the transmission & reception.
BLUETOOTH MICROPHONE & HIFI SPEAKER M200
04