MSDS

P R O DU C T D AT A S H E ET
www.miraclesealants.com
Liquid Poultice Part A
Deep Cleaning Solution
02-2009
Deep Cleaning Action For Most Surfaces Including:
■
Sanded Grout
■
Masonry
■
Quarry Tile
■
C
lay Pavers
■
L
imestone
■
C
eramic Tile
■
Glazed Tile
■
Marble
■
Terrazzo
■
Brick
■
Stucco
■
Concrete
■
Non-sanded Grout
■
Any Acid-Sensitive Natural Stone
Uses
■
Kitchen Counters
■
Kitchen Floors
■
Bathroom Showers
■
Lobby Floors
■
Bathroom Floors
■
Porches & Patios
■
Interior Walls
■
Exterior Walls
■
Monuments
Special Features
■
Easy-to-Use
■
Interior & Exterior Use
■
No Acid
■
Safe for All Polished Stone
PRODUCT DE SCRIPTION
KEEP OUT OF REACH OF CHILDREN. Liquid Poultice is a unique two part
formulation, (Bottle A & Bottle B), designed for deep cleaning all porous
stone surfaces and grout. The percolating cleaning action of Liquid Poultice
penetrates deep into the pores of the surface to safely lift out mold stains,
mildew stains, algae stains, fungus stains, food grease, coffee, tea and
other types of foreign matter from natural stone, grout, tile, concrete, stuc-
co and masonry surfaces.
Liquid Poultice is a non-acidic cleaner that will not harm the polish on pol-
ished stone surfaces.
Sample Testing
Due to the differences of each material, several inconspicuous test patches
should be completed to assure maximum performance. User must deter-
mine suitability of the product for their intended use.
Protect Neighboring Surfaces
Always protect neighboring surfaces including masonry, wood, carpet,
metal, landscaping and other non masonry surfaces.
APPLICATION INSTRUCTIONS
Read entire label and PDS/MSDS before using.
Thoroughly mix 1 part of Liquid Poultice (Bottle A) with 2 parts hot water.
(Cold water can be used but cleaning action will be reduced). Add 1 part
Activator (Bottle B) to the above mixture. Once the Activator is added, be
sure to keep the mixture vented to prevent oxygen build up. Mix in an open
container. Once Activator (Bottle B) has been added, the solution must be
used within 72 hours.
Wet the surface to be cleaned with water lightly before starting. Apply
Liquid Poultice with Mira Brush a clean mop, self-feeding floor machine or
sprayer. Allow the solution to stand for a minimum of 45 minutes while agi-
tating periodically with the appropriate scrub brush. DO NOT allow solution
to dry on the surface. If surface starts to dry, add more Liquid Poultice
Solution. Extract all the dirty remains with a wet vacuum system. Rinse the
surface thoroughly with hot water and allow to dry. Difficult stains may
require a second application. On wall surfaces a fine mist of Liquid Poultice
maybe left to dry after initial cleaning is complete. Liquid Poultice will con-
tinue to pull dirt to the surface for up to 72 hours after completion. Allow to
dry 24 - 72 hours before sealing the surface.
Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,
rust and other dirt and grime use GCFR or Phosphoric Acid Cleaner as
directed.
Water, Stain & Slip Protection
To protect cleaned areas from future soiling, staining and increase static
c
oefficient of friction. We recommend applying the appropriate Miracle
Penetrating Sealer/Impregnator.
Color and Gloss Enhancement
For added color with “Textured and Non polished” surfaces, 511 Seal &
Enhance or Mira Matte may be used. For porous type “Pavers”, 511 Seal &
Enhance may be used as directed.
Polish Enhancement
Periodically use Mira Dust, Mira Polish, Marble Conditioner or Granite
Brite as directed.
Mold, Mildew and Bacteria Sanitation
For best results in killing mold, mildew, bacteria and other micro organisms,
use Miracle Wipes as directed.
Coverage
Coverage will vary depending on density, porosity, texture, surface absorp-
tion, weather, time solution left on surface and application method. Used as
directed, Liquid Poultice will cover approximately 500 - 1,000 square feet
per gallon (45 - 93 square meters per 3.785 liters).
MAINTENANCE
For ongoing maintenance instructions please refer to Miracle Sealants Care
Guide. Refer to the Miracle Sealants Product Recommendation Chart for
specific product recommendations.
Storage
Store Liquid Poultice (Bottle A) and Activator (Bottle B) upright in their
original containers, properly sealed and unmixed. Stored at 77
0
F (40
0
C),
Liquid Poultice will have a shelf life of 12 months. Do not allow to freeze.
Technical Support
For additional technical support, contact Miracle Sealants Company at
1-800-350-1901 or 626-443-6433 ext. 3013
Office Hours
Monday - Friday from 8:30 am - 5:00 pm PT.
1-626-443-6433 or 1-800-350-1901 • Fax: [phone]
website: www.miraclesealants.com
Product Damaged During Transportation
If product is damaged during transportation contact
Info Trac @ 1-800-535-5053
Additional Products
Miracle Sealants Company offers a complete line of water & stain
repellents, sealers, cleaner, polishing compounds, diamond abrasives,
machinery and accessories for the tile, stone, concrete, metal, fabric and
carpet professional or do-it yourself specialist.
Caution
Liquid Poultice is an alkaline liquid. Store in cool area. Only use this prod-
uct in a well ventilated area. Good ventilation means that fresh air is flowing
in such a way as to feel a slight breeze. Continue to ventilate until odors are
completely eliminated. Avoid contact with skin. Chemical resistant gloves
should be worn at all times. Keep small children and pets out of area until
product or surfaces has thoroughly dried. Refer to the MSDS for additional
information.
Warranty
Instructions are a condensed guide and should not be considered com-
plete. In the event of failure, the only obligation of Miracle Sealants
Company shall be to replace such products proven to be defective. Before
using, user shall determine the suitability of the product for their intended
use. User assumes all risks and liability whatsoever in connection therein.
Neither seller nor manufacturer shall be liable for any injury or inability to
use this product.