SDS

MSC-011R - 511 Porous Plus
Revision Date: 12-Jan-2016
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 8
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep container tightly closed and store in a cool, dry and well-ventilated place. Store in a
cool, dry place, out of direct sunlight. Do not freeze, less than or equal to 32°F or heat
above 110°F. Store locked up.
Incompatible Materials
Strong oxidizers.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Proprietary
TWA: 400 ppm
TWA: 400 ppm
TWA: 1400 mg/m
3
(vacated) TWA: 400 ppm
(vacated) TWA: 1400 mg/m
3
IDLH: 2000 ppm
TWA: 400 ppm
TWA: 1400 mg/m
3
Proprietary
STEL: 500 ppm
TWA: 400 ppm
TWA: 500 ppm
TWA: 2000 mg/m
3
(vacated) TWA: 400 ppm
(vacated) TWA: 1600 mg/m
3
(vacated) STEL: 500 ppm
(vacated) STEL: 2000 mg/m
3
IDLH: 750 ppm
Ceiling: 440 ppm 15 min
Ceiling: 1800 mg/m
3
15 min
TWA: 85 ppm
TWA: 350 mg/m
3
Appropriate engineering controls
Engineering Controls
Local exhaust: Recommended
Mechanical exhaust: General ventilation system should be provided.
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Tight fitting, splash proof safety goggles.
Skin and Body Protection
Protective gloves: Plastic or rubber, chemical resistant
Protective clothing or equipment: Chemical resistant clothing.
Respiratory Protection
Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a
NIOSH approved respirator equipped for the exposure or suitable respiratory protection per
29 CFR 1910.134 is required.
General Hygiene Considerations
Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or
tobacco products. Use common sense and care around chemicals. Never mix this product
with other chemicals. Consult your supervisor for all other hygienic and safety practices. All
practices depend on your specific business. Directions for use normally found on label
which will dictate engineering and control measures.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state
Liquid
Appearance
Colorless
Odor
Solvent
Color
Colorless
Odor Threshold
Not determined
Property
Values
Remarks • Method
pH
Neutral
Melting Point/Freezing Point
Not tested
Boiling Point/Boiling Range
> 320 °F / 160 °C
Flash Point
62.77 °C / 145 °F
Evaporation Rate
Not tested
Flammability (Solid, Gas)
Not determined