User's Guide

ManualsBrandsMiracle ManualsAudio EquipmentMiracle, m M200 Wireless portable karaoke speaker

The Sing M200

Miracle, m M200 Wireless portable karaoke speaker

☎ +82-2-1566-4520

Yeomgwang na-dong, 27, Mangu-ro 81-gil, Jungnang-gu, Seoul, Republic of Korea

www.doorskorea.com

USER GUIDE

This device has completed a conformity test for business use,

and radio interference can occur when used for family use.

Please read this manual carefully and follow directions.

Please keep this manual for future use.

Summary of content (10 pages)

PAGE 1
Miracle, m M200 Wireless portable karaoke speaker The Sing M200 USER GUIDE This device has completed a conformity test for business use, and radio interference can occur when used for family use. Please read this manual carefully and follow directions. Please keep this manual for future use. www.doorskorea.
PAGE 2
English 日本語 한국어 01 Information for initial use ① Battery requires full charge when first use to maintain optimized battery capacity. ② C-Type charger with up to 1.8A is required for charging. ③ When battery is being depleted, the battery and circuit protection function is activated. It will lower the volume to base level or shut down the product. You can continue to use this device when the battery is depleated by connecting to the charger.
PAGE 3
English 日本語 02 한국어 Charging the product ·The battery is embedded in the speaker main unit. The MIC uses AA-type batteries. ·Please full charge the product when first use since the product has not been fully charged when manufactured. ·You should turn the product off during charging for proper charging process. Required time to charge Approx : 1.
PAGE 4
English 日本語 03 한국어 How to use MIC 1 Turn on the MIC & LED display information ① Press and hold the power button on the MIC to turn on the MIC. ② The frequency channel is automatically connected with the LED screen on the MIC turns on. (You can change the channel when the channel shows as OFF or there is no sound output) SET SET ③ The MIC is connected accordingly if the connected channel is displayed on the LED screen and the ‘A-ON’ letter is displayed on the LED screen of the speaker.
PAGE 5
English 日本語 한국어 04 5 Information on upper status line and channel lock ① The battery balance display shows the balance of the battery. ② The frequency signal status display shows the communication status between speaker and MIC. ③ You can use lock feature when you press and hold and together. *What is Lock Feature? A function to cut off interfering frequencies around the transmission & reception. How to pair Bluetooth How to pair Bluetooth (This procedure is developed based on Android Smartphones.
PAGE 6
English 日本語 05 한국어 Information on LED Display on the front side Bluetooth Pairing Mode AUA Cable Connection Mode Connection Status Display MIC Channel ON/OFF Display battery balance - In charge : Blinking - Fully charged : hold Bluetooth Connection Display USB - Ready status : Blinking - Normal connection : Hold USB Connected Information on Buttons on the Remote Controller You can power on the product with the remote controller when the power is supplied from the external suppliers such as ch
PAGE 7
English 日本語 06 한국어 Information on the function of the button on the Speaker Press and hold for 3 sec ★Power ON/OFF★ Mode changed in sequence when clicking the button BLUE AUX (Auto change when connected in USB mode) Be cautious when connecting to charging socket! Most of the damages come from this connection! : Press and hold - Power ON & OFF / Press briefly - Change mode : Play / Pause : Press & hold - Lower the volume / Press briefly - Play previous song : Press & hold - Increase the volume / Pre
PAGE 8
English 日本語 07 한국어 Product Component 2 Wireless MIC User's Guide Remote controller Speaker main unit Pouch AUX Cable (3.5mm+3.5mm) MANUAL (Pouch not included in M200-A) Specification Model Rated Voltage Recharge hr Manufaturer Battery KC Size / Weight Distributer M200 Bluetooth Ver 5.0 DC 5V / 7.4V / 2,500mAh Output 20W (MAX 40W) 1.5 ~ 4 hr Usage hr 1.
PAGE 9
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 10
ISED Statement English: This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.