Specifications

22
23
The Input Source list allows selection of the following: DTV (Digital
Television), ATV (Analogue Television), SCART, COMPONENT
(Y, Pb, Pr), PC-RGB, HDMI, COMPOSITE, and S-Video.
1 Press the POWER ( ) button to switch the Mirage on.
2 Press the Input ( ) button to display the Input Source list.
3 Press the Input ( ) button or the UD buttons until the required
source is selected.
4 Press the OK ( ) button to confirm selection of the chosen
input and to clear the Input Source list from the screen.
Press the EXIT ( ) button to close the Input Source list without
selecting an alternative source.
If external sources have been connected to the Mirage they may be viewed by selecting the appropriate
input.
Selecting a Source
Please allow a minimum of five seconds after switching the Mirage off before switching it on
again.
English is the preset language for the Mirage. The language for on-screen menus can
be selected during initial set-up or at any time in the future.
1 To switch the Mirage on, press the POWER ( ) button.
The LED indicator will show green and Mirage will display a
picture within ten seconds.
2 To switch the Mirage to standby, press the POWER ( ) button
again. The LED indicator will show red to indicate that the Mirage
is in standby mode
Switching the Mirage On/Off
EPG MENU
16:9
AUDIO
OK
EPG MENU
EXIT
EPG MENU
16:9
AUDIO
OK
EPG MENU
EXIT
OK
EPG MENU
EXIT
Selecting the On-screen Language
The on-screen menus can be in any of the following nine languages:
English, Español, Françes, Italiano, Nederlands, Polski, Portugês,
Pyccкий, and Deutsch.
To change the language used follow the sequence below:
1 Press the MENU ( ) button to display the Channel menu.
2 Press the L button twice to display the SETUP menu.
3 Press the D button once to select Language.
4 Press the LR buttons to select the required language.
5 Press the EXIT ( ) button once or the MENU ( ) button twice
to save the language choice and close the SETUP menu.
All the on-screen displays will now be in the chosen language.
CHANNEL
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
CI Information
SETUP
Language English
Audio Languages English
Subtitle Languages English
Hearing Impaired Off
Country UK
☛
The selected language applies to all modes.
Input Source
DTV
ATV
SCART
COMPONENT
PC-RGB
HDMI
COMPOSITE
S-Video
EXIT OK