Specifications

10
11
The Component and Composite Video Connectors
Ensure that the Mirage does not get splashed whilst it is open. Ensure that the Mirage does not get splashed whilst it is open.
Mirage Connector Array
To view television channels, a signal must be received by the Mirage
from one of the following sources:
an antenna
a satellite receiver
a cable television receiver.
Antenna Feed
Connect the antenna or input cable to the 75Ω coaxial connector on
the rear of the Mirage.
Picture quality is determined by the signal level, it is recommended
that a qualified aerial technician is consulted.
CVBS In
IR Link
Antenna In
O
u
In
Antenna input on
the Mirage
Cable Television
Network
or
(A) For Component Video
1 Connect the audio cable to the Left and Right Audio connectors (white and red) and the video cable
to the Component Y, Pb and Pr Inputs (green, blue and red) on the Mirage and the corresponding
connectors on the external equipment such as a satellite receiver or DVD player.
2 If the external equipment only has a mono audio connector, it should be connected to the left
(white) connector of the Audio Input.
(B) For Composite Video
1 Connect the audio cable to the Left and Right Audio connectors (white and red) and the video cable
to the CVBS Composite connector (yellow) on the Mirage and the corresponding connectors on the
external equipment such as a satellite receiver or DVD player.
2 If the external equipment only has a mono audio output, it should be connected to the left (white)
connector of the Audio Input.
CVBS In
PC In Out
Antenna InAudioComponentS-VideoEURO-SCART
R
GB
Audio RL
YPb Pr
CI Port
Video Game Console
VCR
DVD Player/Recorder
Satellite Receiver,
Cable Box or Hard Disk
Recorder
(A) for Component Video
(B) for Composite Video
Mirage Connector Array
DC12V Power In
HDMI (High Definition Multimedia Interface)
PC/Analog RGB Input (D-SUB)
EURO-SCART – (RGB, FB, AV In, AV Out)
S-VIDEO In
Component Video Inputs: Green = Y,
Blue = Pb (Cb), Red = Pr (Cr)
Component/S-VIDEO Audio In:
White = Left, Red = Right
PC Audio In
1
2
3
4
5
6
7
Audio Out (Headphones)
CI Port for Conditional Access Module (CAM)
Composite Video Input (CVBS)
Antenna Input 75 Ω
Infrared Link – In and Out
RJ12 – for Hotel TV System Integration
RS-232 – for Home Automation Systems
Loudspeaker Connections – The internal
speakers are connected during manufacture.
External 8 Ω speakers can be used instead of
the built-in speakers but only one pair of
speakers may be connected at any one time.
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6
7
8 9
10
11 12 13 15 1614
CVBS In
PC In
Out
RS-232
Right
Left
Loudspeakers
RJ12
IR Link
Antenna In
In
Out
AudioComponentS-VideoEURO-SCARTPC RGBHDMI12VDC
Audio RL
YPb Pr
CI Port
Connecting an Antenna or Cable