User manual

Basic Operation

3. Mark the button Start by using the keys PR+ and PR-, and confirm by pressing the OK

key.

Now it is being checked if the software currently installed on the receiver is up-to-date. If

it is not up-to-date, then the current software version will be downloaded via satellite and

installed onto the receiver. After end of installation you will be asked if the update should

be saved.

4. Select the option

Yes

to accept the update. The satellite update may take up to one

hour. Do not switch off the receiver during such period!

5.3 Commissioning

After first switching-on or after resetting the receivers, various windows will open:

5.4 Language

By default, the language is preset to

Deutsch

[German].

 Please ensure that the setting is correct; you may

change your settings by correspondingly pressing

the keys PR+ and PR-.

 Confirm by pressing OK to go to the next window.



The submenu Language can be

accessed anytime via the menu

System Setup

5.4.1 RAPS Start

Your receiver is equipped with RAPS. RAPS means Receiver Automatic Programming Sys-

tem. RAPS can automatically update the channel lists of your receiver.

What is RAPS?

Currently, the satellites Astra 19.2° and 23.5°, Eutelsat Hot Bird 13° East, Eurobird 9° and

Turksat 42° offer a four-digit number of digital TV and radio channels.

At delivery, state-of-the-art satellite receivers have all important channels already stored. But

what happens after that? New and interesting channels are added almost weekly, and there

are channel changes time and again.

Updating the channel list with a present receiver is not quite easy for most users. When

performing a channel search, invalid data are not deleted, and usually the new channels are

just added at the end of the list; this requires time-consuming reprogramming of the channel

list.

The RAPS system of your receiver automatically performs such programming work.

The window RAPS Automatic Installation is the second window of the installation process.

Every time you switch off your receiver, RAPS checks whether there are any changes with

the channel lists (RAPS scan). This only takes a few seconds.

In case of changes, the new data are automatically included into the new channel list (RAPS

download) and displayed in a table. If a channel changes the receive parameters, then this is