User manual

Basic Operation
22
After entry of password, you may
− set if access to the sub-menus is protected by password,
by selecting the Menu Lock and selecting
Off or On by using the keys / ;
− set if certain channels are to be locked by a PIN,
by selecting PIN and selecting
Off or On by using the keys / ; or
− change the password:
 Select the field New Password.
 Enter a new password.
 Go to the field Confirm Password.
 Again enter the new password.
4. Press OK to save your changes and to leave the sub-menu.
5.11 Set Time
Reasonable operation of the receiver requires setting of system time. By default, the receiver
is set to GMT
8F
9
Usage, i. e. date and time are taken from the received signal. Time zone is set
to GMT + 1 hour (+ 1:00) by default. Required changes can be made in the sub-menu Time:
1. Select the menu System Setup (see above).
2. Select the sub-menu Time and confirm by pressing OK.
3. Select the item GMT Usage and switch on or off GMT Usage by using the keys
/ .
On = automatic time setting via satellite signal is activated.
Off = automatic time setting via satellite signal is deactivated.

It’s recommended to keep the presetting (GMT Usage On ).
4. Select the item GMT and select your time zone by using the keys / ; for
example, the time zone of Germany, Austria and Switzerland is
GMT +1:00 .
5. Select the item Summer Time and switch Summer Time
Off or On by using the keys
/ .

 Please verify the presetting and correct them, if required. Please also
consider corresponding change of those settings.
6. If automatic time setting (GMT Usage) is switched off, then date and time should be
manually entered:
For this, select the item Date, select the position to be changed by using the keys
/ , and enter the current date by using the numeric keys. Then, select the
item Time, select the position to be changed by using the keys / , and enter
the current time by using the numeric keys.
9
GMT = Greenwich Mean Time