User manual

Extended Settings and Functions

9.2.4 Move Channels to Another Channel Position

1. Press the yellow function key to activate the function Move.

2. Mark the channel to be moved by using the keys PR+ and PR-, and confirm by pressing

OK. The channel to be moved is marked in the channel list .

If you want to move more than one channel, then mark further channels by using the

keys PR+ and PR-, and respectively confirm by pressing OK. The channels to be moved

should not be necessarily in an uninterrupted sequence.

Example:

Before moving – three channels

are marked

After moving

3. Select the channel number to which the channel/channels are to be moved to by using

the keys PR+ and PR-, and again press the yellow function key.

4. Press the EXIT key to leave the function Move.

9.2.5 Rename Channels

1. In the sub-menu Edit Channel – TV Channel List, press the blue function key (L/R).

2. Press the green function key to activate the renaming process.

3. Mark the channel to be renamed by using the keys PR+ and PR-, and confirm by press-

ing OK.

4. The window Rename will be displayed.

− Select the character to be changed

by using the keys and .

− Enter the new character respectively by using the numeric keys of the remote con-

trol.

− Press the red function key (CAPS) to switch between upper case and lower case.

− Press the green function key (DEL) to delete the respectively selected character.

− Press the yellow function key (OK) to accept the changes made so far and to close

the window Rename.

− Press the blue function key (CANCEL) to discard the changes made so far and to

close the window Rename.

5. Press the green function key to leave the rename mode.