User manual

Extended Settings

and Functions

9.5 OSD Setting

 Select in the menu System Setup the submenu OSD17F

Setting and press OK.

9.5.1 Hide OSD

 Using the keys and , set the number of seconds after which the OSD should

be hidden. You may set values from

1 to 10 seconds

Default value is

s (factory setting).

9.5.2 OSD Transparency

 Select transparency of the on-screen menu by using the keys

and .

You may set values from

0% (OFF)

(no transparency) to

40%

(almost transparent). De-

fault value is

OFF

9.6 Automatic Standby Function



Based on current EC regulations, this receiver is equipped with an

energy saving system. After three hours, the receiver will automatical-

ly switch to energy save mode (energy consumption of less than 1 W)

unless a function is triggered via remote control during such period

(e.g. volume change or switching of channels). You can deactivate the

automatic standby function via the menu.

1. Select in the menu System Setup the submenu Other and press OK.

2. Select Auto Standby to switch on or switch off the automatic standby function, using the

keys and (factory setting is Auto Standby

9.7 Display Setting

Select in the menu Tools the submenu Display setting and press OK to edit various display

settings:

 Select Brightness to change the brightness value from 0 to 100 (default value is 50) by

using the keys and .

 Select Contrast to change the contrast value from 0 to 100 (default value is 50) by using

the keys and .

 Select Saturation to change the saturation value from 0 to 100 (default value is 50) by

using the keys and .

 Select Hue to change the hue value from 0 to 100 (default value is 50) by using the keys

and .

 Select Sharpness to change the sharpness value from 0 to 10 (default value is 5) by

using the keys and .

OSD = On Screen Display