User manual

Product Description
7
• 2 batteries (AAA) for remote control
• user manual
2.2 Receiver
There are two versions of the mirage receivers I and II. Please select the description fitting to
your set. Differences are noted respectively.
2.2.1 Front Panel
I II
No.
Description
1
LED (indicating “good reception”)

The green LED (light emitting
diode) on the receiver front
panel does not light immediate-
ly after connecting the device to
the power supply ("power
LED"), but only after the instal-
lation of programs is completed
(either via RAPS or via program
scan), and a video signal is
routed to the TV set.
If you plug the power cord for
the first time, the LED lights up
only after installation. During
later operation the receiver’s
program list already exists; it
takes just a few seconds from
inserting the power plug until
you see the green LED.
No.
Description
1
Display
4-digit display
2
LED red
Indicates, that the receiver
is in Standby mode.
3
STANDBY
Switch between standby /
normal operation
4
PR-
Channel down / down-
navigation in menu
5
PR+
Channel up / up-navigation
in menu
6
LED green
Indicates that a valid video
signal is routed to the TV
set.