om design series manual printed in canada 7ai//eomdspkr
om design series manual contents 1.0 GENERAL INFORMATION 1 2.0 GETTING STARTED Unpacking 3 3.0 INITIAL PLACEMENT AND MOUNTING INSTRUCTIONS OMD-28 OMD-C2 OMD-R 5 4.0 CONNECTING YOUR SPEAKERS TO THE SYSTEM Standard connection Bi-wire method Tri-wire method Bi-amp/Tri-amp 8 5.0 MULTI-CHANNEL AUDIO SET-UPS 12 6.0 BREAK-IN PERIOD 12 7.
om design series manual 1.0 general information MIRAGE OM DESIGN SERIES WHAT EXACTLY IS OMNIPOLAR? Please take the time to read all of the instructions contained in this manual to make certain your system is properly connected and functioning correctly. Please retain the carton and packing materials for this Mirage product to protect it in the event it ever has to be shipped to a service center for repairs.
om design series manual 1.0 general information OM DESIGN SERIES OVERVIEW The OM Design series consists of three different models, the OMD-28, the OMD-C2 and the OMD-R. The following drawings show the three different models with their respective dimensions.
om design series manual 2.0 getting started PACKAGING OMD-28 The packaging of the OM Design series was specifically designed to ensure the safe transportation of your new speakers. If the packaging has been damaged during shipping, please contact your dealer or shipping company immediately. Please read the following instructions carefully to avoid damaging the speaker cabinets during the installation process. CAUTION: HANDLE WITH CARE.
om design series manual 2.0 getting started 2. Remove the protective cover from the top of the box, and tip the box on its side, so that the side marked with “open here” is pointing upwards. 3. Remove the manual and the accessory kit which will be visible upon opening the carton. Unpack the protective gloves contained within the accessory kit and use them for any of the following unpacking and installation steps. 4.
om design series manual 3.0 initial speaker placement OMD-28 FRONT SPEAKERS For best stereo imaging, the left and right speakers should be the same distance from their respective sidewalls. If the distance from one speaker to the listener is very different from the other it can affect the soundstage or stereo imaging. Therefore, the ideal position is having the speakers equidistant to the listener.
om design series manual 3.0 initial speaker placement OMD-C2 CENTER CHANNEL OMD-R The OMD-C2's Omnipolar technology is uniform in dispersion, providing a perfectly spherical, full spectrum sound radiation pattern that greatly expands the prime listening area. The rear speakers can vary greatly in position depending on the room layout, and the furniture placement. The ideal position is either on the sidewalls, or rear walls. The center channel should be positioned at or slightly below ear level.
om design series manual 3.0 initial speaker placement You can also achieve excellent results in the rear position. Try not to place the speakers directly into a corner. Leave 2 or more feet between the edge of the cabinet and the sidewall, so the sound can reflect into the room environment. The rear position is usually chosen when your room will not accommodate the sidewall position due to unequal walls, a doorway, or a large opening, etc. It is recommended that the rear center (6.
om design series manual 4.0 connecting your speakers CABLES AND AMPLIFICATION Use the best quality speaker cables you have available. The length and type of speaker cable used in your system can have an audible effect and allow you to maximize the transmission of power from your amplifier to the speakers.
om design series manual 4.0 connecting your speakers TRADITIONAL CONNECTION METHOD 1. Using your choice of speaker wire and termination method, connect the speaker cable (minding the positive and negative polarities), to the lower set of connectors. Ensure the terminals are tight. The gold “shorting straps” that connect the lower and upper connections (in the case of the OMD-28, the shorting strap should bridge the lower, middle and upper set of binding posts) must remain in place. 2.
om design series manual 4.0 connecting your speakers BI-WIRE METHOD This method involves using multiple cables and connectors, to access two sets of terminals on the OM Design loudspeakers simultaneously. The benefit of bi-wiring is to reduce noise, as you will have twice the thickness of cable between the amp and speakers as the traditional method would provide. For more details on the benefits of bi-wiring, please discuss this with your authorized MIRAGE® retailer.
om design series manual 4.0 connecting your speakers OMD-28 The OMD-28 is equipped with 3 sets of binding posts which allows the speakers to be tri-wired/tri-amped. The tweeter's terminals are on top, the midrange driver’s terminals are in the middle and the woofer's terminals are at the bottom. Gold plated shorting straps are factory pre-installed, one strap to connect the three negative and one strap to connect the three positive terminals.
om design series manual 5.0 multi-channel audio / home theater set-ups 6.0 break-in period MULTI-CHANNEL AUDIO SET-UPS The OM Design series offers the ultimate in flexibility; it excels at traditional 2-channel stereo set-ups or can provide illustrious multi channel audio / home theater performances. Depending on your particular room layout and your personal requirements the OM Design series can be used for any imaginable multi-channel set-up.
om design series manual 7.0 fine tuning your audio system Before beginning any fine-tuning, please ensure all connections are properly made and your speakers have had the chance to break-in for a minimum of 100 hours. Also, it is assumed that you have already performed the initial placement of each speaker in your system and are now trying to fine tune the performance of your new speakers in your room. This will ensure the proper results are achieved.
om design series manual 7.0 fine tuning your audio system HOW TO FINE-TUNE THE IMAGING HOW TO INCORPORATE ACOUSTIC ROOM TREATMENTS If you are experiencing issues with imaging, first ensure your speakers are in phase with each other. If this is the case and imaging is still an issue, moving the speakers closer together or toeing them in slightly (angling them towards the listening position) can aid in this respect.
om design series manual 8.0 installation of isolation feet (omd-28 only) Once you have completed the fine-tuning process and have found the ideal position for the speakers in your room, you are ready to install the feet of the OMD-28. In the accessory case you will find four machined aluminum feet. In order to install the feet, please follow these two easy steps: NOTE: TWO PERSONS ARE REQUIRED IN ORDER TO SAFELY INSTALL THE FEET OF THE OMD-28. 1.
om design series manual 9.0 cleaning and cabinet care The cabinets of your new OM Design speakers are constructed of the finest quality veneers and hardwoods available and are protected with hand rubbed superior quality urethane finishes. Great care should be taken when cleaning the cabinet. Properly maintaining the fine finish will enhance your home's decor and preserve the value of your new speakers for many years to come.
om design series manual warranty garantie LIMITED WARRANTY POLICY IN THE UNITED STATES AND CANADA GARANTIE AUX ÉTATS-UNIS ET AU CANADA MIRAGE® warrants this product to the retail purchaser against La société MIRAGE® garantit cet appareil contre toute défectuosité attribuable aux pièces d’origine et à la maind’oeuvre.