Specifications

Removing the Clear Plastic
Cover
Your MIRAK unit has a protective plastic cover
over the front control panel. This plastic cover is
designed to protect the control knobs and the
display panel from spills, and should remain in
place when the unit is being used. To use the
knob(s) while the plastic cover is in place, spin
the knob(s) from the bottom where the knob
projects below the plastic cover. This plastic
cover can be easily removed for cleaning by
grasping the cover at each bottom corner and
gently pulling the sides of the plastic cover away
from the case while lifting the cover toward you.
To replace the cover simply slide it back onto
the case.
The Power Switch
Your MIRAK unit has a separate ON/OFF power
switch which is a black rocker switch located on
the lower front corner of the right side as you’re
facing the unit. This separate power switch
allows you to turn your MIRAK hot plate, stirrer
or stirring hot plate on or off without disturbing
your temperature and/or speed setting. Your last
setpoint will be held in memory even if the unit
is unplugged and will reappear on the display as
soon as the unit is powered up again.
Whenever the power is on, a green power light
illuminates on the front control panel.
12
Operation