Specifications

20. Screw the bracket with the logic
board/power board assembly back onto
the metal plate.
21. Reattach all wires.
22. Replace display board and attach
cables.
23. Bundle wires and resecure with tie-
straps.
24. Replace bottom and secure with
screws.
Replacing the Top Plate
Assembly
1. Unplug unit, turn unit upside down and
remove screws from bottom.
2. Open unit. Note position and color of
wires and cables connected to the logic,
power and display boards.
3. Remove the display board as noted in
steps 3 - 5 under “Replacing the Display
Board.”
4. Unclip the bundle of wires.
5. Remove wiring from power board. (If
you have a stirrer skip to step 9.)
6. Note the lower heating ELEMENT wire
which runs underneath the power
board/logic board assembly. Pull this
element wire free from underneath the
board assembly.
28
MAINTENANCE AND SERVICING