User's Manual

GUIDE TO INSTALLATION AND OPERATION

JAZZ-800 | 23

Video Select – Section 2

SDI 1 (Button) – Assigns the SDI 1 Input to the currently selected input channel or SDI 1 output to the

currently selected output channel. After selecting, press the ROTARY ENCODER to accept.

Button Color State Mode

Comments

Red Flashing Update

No input signal (only when selected)

Green Solid Update

Available but not selected

Cyan Solid Active

Shows association with currently selected input or output

Blue Solid All

Shows the state of the currently selected input or output

Blue Flashing Update NEW source or destination selected – Press the ROTARY

ENCODER to confirm

Note: SDI IN 1 will always be associated with SDI OUT 1.

SDI IN 1 may also be associated with SDI OUT 2 if used in the 1-in/2-out configuration.

SDI 2 (Button) - Assigns the SDI 2 Input to the currently selected input channel or SDI 2 output to the