Operating instructions

GUIDE TO INSTALLATION AND OPERATION
ASI-Bridge CAM
Safety Compliance Information
Safety Compliance
This equipment complies with:
- CSA C22.2 No. 60950-1-03 / Safety of Information Technology Equipment, Including Electrical Business Equipment.
- UL 60950-1 (1
st
Edition) / Safety of Information Technology Equipment, Including Electrical Business Equipment.
- IEC 60950-1 (1
st
Edition) / Safety of Information Technology Equipment, Including Electrical Business Equipment.
CAUTION
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel. Servicing should be done in a static-free environment.
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with:
FCC Part 15, Subpart B, Class A - Digital Devices
EN 55022 Class A, Electromagnetic Emissions,
EN 55024 Class A, Electromagnetic Immunity
EN 61000-3-2 & -3-3, Disturbance in Supply Systems
EN 61000-4-3, -4, -5, -6, -11 Immunity
WARNING:
THIS DEVICE IS SUSCEPTIBLE TO ELECTROSTATIC DISCHARGES (ESD).
ESD can influence the operation of this device either by a direct contact or by inductive coupling or radiation.
In accordance with Standard EN 61000-4-2: "A temporary loss of function is allowed, provided such function
is self-recoverable when the test stimulus is suppressed or can be restored by the operation of controls."
CONTACT MIRANDA
For technical assistance, please contact the Miranda Technical support centre nearest you:
Americas
Telephone:
[phone]
e-mail:
[e-mail]
Asia
Telephone:
[phone]
e-mail:
[e-mail]
Europe, Middle East,
Africa, UK
Telephone:
[phone]
e-mail:
[e-mail]
France (only)
Telephone:
[phone]
e-mail:
[e-mail]
Visit our web site at www.miranda.com