RCP-200 Version 1.
1 Copyright Notice Copyright © 2012 Miranda Technologies Inc. All rights reserved. ATTENTION: Please read the following terms and conditions carefully. By using RCP-200 documentation, you agree to the following terms and conditions: Miranda Technologies Inc. hereby grants permission and license to owners of the RCP-200 to use their product manuals for their own internal business use. Manuals for Miranda Technologies Inc.
Table of Contents Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 New Features and Enhancements on the RCP-200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 New in Version 1.50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 New in Version 1.40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
toc iv
Release Notes RCP-200 version 1.50 is a minor release containing enhancements and bug fixes. The Release Notes list new features, bug fixes, and known issues and limitations in this release. Summary New Features and Enhancements on the RCP-200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Bugs Fixed on the RCP-200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Known Issues and Limitations . . . . . . . . .
Release Notes New Features and Enhancements on the RCP-200 upon starting the RCP-200, users are asked to log in with a user ID and password on a virtual keyboard displayed on the screen. Note: The varying levels of permissions are administered in iControl. See also For more information, see the Access Control chapter of the iControl Version 4.11 User Guide. Densité Services • [Ref.
RCP-200 Release Notes not the first page. Additionally, the iControl Services pseudo-router remains anchored on the first button. New in Version 1.32 Support Added for these Products • [Ref. #31098/30307] XVP-3901: 3Gbps/HD/SD up, down & cross converter with audio processor: Added Fingerprint feature (requires iControl version 4.10 or later and XVP-3901 firmware version 3.0.0 or later). New in Version 1.31 User Interface • [Ref.
Release Notes Bugs Fixed on the RCP-200 • VEA-1002/1023: Analog video distribution amplifiers with EQ. • DDA-1113/1133: AES distribution amplifiers. • WDA-1001: Word clock distribution amplifier. • 3DX-3901: Stereoscopic 3D video processor (3Gbps/HD). Enhancements and New Features See also For more information about the following enhancements and new features, see the RCP-200 Advanced Remote Control Panel Guide to Installation and Operation (M876-9900-101). • [Ref.
RCP-200 Release Notes that card. In large systems of complex cards, the alarm count easily becomes high and consumes memory. • [Ref. #30017] Thread proxy leak in Densité Manager when using RCP-200: A new Proxy Listener thread is created in Densité Manager each time a card is selected on the left RCP-200 screen. Services may start behaving erratically and the Densité Manager may run out of memory. Fixed in Version 1.30 • [Ref.
Release Notes Known Issues and Limitations [Ref. #30587] After the Router Selection feature (ALT+ROUTER) automatically recognizes an HCO-122 Densité card as a router, the following sequence of user steps may cause an error message to appear indicating the service is not listed in GSM: 1. Select the HCO-122 service from the ALT-CAT-INDEX service listing. 2. Switch to the CAT-INDEX matrix. Note: This system behavior does not have any impact upon switching.
RCP-200 Release Notes Note: None of these Densité cards can be configured yet through RCP-200, and the support of these cards as routers is in Beta stage only. • [Ref. #30583] Keyboard usage is limited: Connection of a USB keyboard to the RCP-200 is allowed, but not recommended. Specific keystroke combinations could put the panel in a state which may not be obvious to the user how to escape from. Additionally, the validation being done for direct data entry below the sliders is not complete.
Release Notes Known Issues and Limitations • [Ref. #28445] Minimum Delay for the AMX-3981, ADX-3981, EAP-3901, EAP-3101: The Minimum Delay paramete that can be applied to the video output timings, is not available under RCP-200. Workaround: Use the iControl panel to set this parameter. Remember that once the Minimum Delay parameter is set the delay sliders are grayed-out, and some card features are disabled. • [Ref.
RCP-200 Release Notes minutes to notify the user of such a loss. If during that time some operations are done on the right screen, no feedback will be provided, and the unit will appear to be frozen. Workaround: If this happens, there is no need to restart the RCP-200 unit; check and repair your network connection, and wait a few seconds until the unit becomes responsive.
Release Notes Known Issues and Limitations 10
Contact Us! Miranda Technical Support For technical assistance, please contact the Miranda Technical Support center nearest you: Americas Office hours: Telephone: Fax: E-mail: Asia 9:00 a.m. - 9:00 p.m. (EST) 1-800-224-7882 +1 514 335 1614 support@miranda.com Office hours: Telephone: Fax: E-mail: Europe, Middle-East, Africa, UK China Office hours: Telephone: Fax: E-mail: Telephone: E-mail: 9:00 a.m. - 6:00 p.m. (GMT) + 44 118 952 3444 + 44 118 952 3401 asiatech@miranda.