Specifications

GUIDE TO INSTALLATION AND OPERATION
RCP-100 | 21
RCP100.xxx> copytoflash
Erasing and copying may take several minutes.
Moving data to flash disk...
Disk data copied to flash memory.
RCP100.xxx>
16. After the files are copied into the RCP-100 flash memory, type the command restart
RCP-100 will restart with the new upgrade.
17. Close the Telnet and WS_FTP applications.
18. Re-establish the initial settings for the RCP-100 (Imaging and Densité communicators activation,
Directory Services activation if necessary)
6 Specifications
Physical
Dimensions: 1 RU x 236mm (8”) deep
Full spec. temp. range: 0-40ºC
Voltage input range: 100-240V~, 50/60Hz
Power: 15W max.
Connectors
RS-232 DE-9M (port A and B)
RS-422 DE-9F (port B)
Ethernet: RJ-45 (Ethernet 10BASE-T control)