Instruction manual

GUIDE TO INSTALLATION AND OPERATION

RCP-200 | 9

7. List This sets the Left LCD in the List navigation mode. This mode shows the entire list of detected

devices and other RCPs. Sorting and filtering is available from this page. See section 4.5. This button

will brighten whenever the List Navigation mode is activated.

8. Groups This brings up the Groups navigation view on the Left LCD. Groups can be built based on equipment

type, department, physical location or any other logical or pre-defined criteria. See section 4.6. This

button will brighten whenever the Groups navigation mode is activated.

9. Router This brings up the Router view on the Left LCD. The Router view gives direct access to equipment

using a simple router paradigm such as “SAT-007” and “Take”. See section 4.7. This button will

brighten whenever the Router view is activated.

• This button may be labeled as “Cat Index” on earlier versions of the panel.

10. Custom The function of this button can be customized. Please contact your Miranda representative for more

information.

• This button may be labeled as “User” on earlier versions of the panel.

11. Diagram (future use)

12. Picture (future use)