Instruction manual

GUIDE TO INSTALLATION AND OPERATION
RCP-200 | 25
Note: ROUTER view uses the LABEL, the SHORT LABEL or the SOURCE ID data associated with each
device in iControl to identify them. The user should decide which of these will be used, and ensure that there
is some structured and meaningful scheme for entering data in these fields in the iControl system. Note that:
• The default value in the LABEL column is the device type.
• Devices where the selected pointer field is empty will not appear on the device list in the router view.
• Unsupported devices cannot be masked from the router view.
4. Push the SELECT button to save the selected values and return to the Router view,
- or -
Push the ROUTER button to exit this view and return to the Router view without making any changes.
To select a router for control in Router View, do the following:
1. Push and hold the ALT button (turns bright) and push the
ROUTER button. The left screen will display the Router
view configuration panel.
• In this view, selected items appear black with white
text
2. In the left column, labeled ROUTER, are displayed all
routers accessed by this RCP-200 through the
associated appservers. Touch a router in the list to select
it.
• If the text is red (as shown here) the router is off-
line and should not be selected for control
3. In the Level list on the right side, touch the level(s) that you wish to control.
4. Push the SELECT button to confirm the selected values and return to the Router view,
- or -
Push the ROUTER button to exit this view and return to the Router view without making any changes.
5.3.1 Select the GUI Style for Router View
The Router View screen (left LCD) is set up to represent a router control panel.
The RCP-200 offers two different GUI styles for the Router View user interface. Each of these styles can be used in
both device selection and router control modes.
Category Index GUI:
• This GUI style uses a Prefix – Number identifying scheme.
• A matrix of Prefix sectors is shown on the upper left. Each prefix is a unique alpha-numeric label, and all prefixes
in the system are displayed, arranged alphabetically. Sectors that contain a prefix will be colored; unassigned
Note: Except for the HRS-1801 10x4 Densité router, routers first need to be defined and configured
using iRouter to appear in this RCP-200 list. Please refer to iControl documentation for instructions on
how to configure routers.