Instruction manual

GUIDE TO INSTALLATION AND OPERATION
RCP-200 | 35
Comments: As entered by the user in the device’s iControl Info panel, or directly in the iControl Navigator window
Category selection area
These two rows of selection points are labeled according to the specific requirements of the device, and not “Category
1” etc. as shown in the figure. Unused points are not labeled.
• Touch a category to select it.
• The currently-selected category is highlighted with a lighter background – see Category 5 in the figure
Sub-category selection area
The tabs in the Sub-category selection area give a more focused breakdown of the category that has been selected.
The number of tabs varies with the category. Each category will have at least one tab, and may have as many as 16.
• Touch a tab to select it
• The currently-selected tab will be highlighted with a green or yellow background – see Sub-category 2 in the
figure.
Control Area
The control area is populated with controls and indicators relevant to the Category / Sub-category that has been
selected. The controls are manipulated with the control knobs beneath the screen; touch control is not used in this area.
Here is an example of a control area with many different types of elements:
The control area is nominally divided into eight side-by-side sectors, each corresponding to one of the control knobs.
Embossed marks on the panel between the knobs indicate the knob/sector relationship.