Operating instructions

1-6 Vertigo XG Installation & Quick Start Guide
Introduction
Rear panel components
The Vertigo XG’s rear panel provides convenient access to the video card’s I/O connector,
which provides 4 SD/HD SDI video outputs, a reference signal input, and AES audio
input/output. The rear panel also provides access to the graphics card connector, as well
as various I/O ports (RS-422, USB, Ethernet...etc.).
Figure 1-2
identifies the components and connectors on the rear panel of the Vertigo XG
chassis.
Figure 1-2. The Vertigo XG’s rear panel components (XG22-e model)
NOTE
In some cases, the positioning of the connectors on the Vertigo XG’s rear panel differs
depending upon the hardware options installed. See page 1-3
for a list of the Vertigo XG’s
hardware options.
Power Supply Modules (3)
RS-422 Connectors
USB 2.0
Network Ethernet
Connectors (2)
SDI Video Card
Connectors (4)
I/O Connector
Graphics Card
System Fans (2)
Serial
RS-232 Ports (2)
Mouse
Keyboard
Connectors (2)
(option)
Audio I/O Ports
(Disabled)
Discrete Audio
Connectors (2)
(option)
Connector
Connector
GPI Card Connector
(option)
Time Code
Card
LTC
IN
LTC
IN