Operating instructions

2-10 Vertigo XG Installation & Quick Start Guide
Installation and quick start instructions
13. Slide the Vertigo XG chassis into the rack as shown below.
The chassis may not slide into the rack smoothly or easily when installed for the first
time. Adjustments to the slide assemblies might be necessary to achieve a smooth
insertion.
CAUTION
Due to the heavy weight of the Vertigo XG device, ensure that the rack is securely anchored
onto a unmovable surface or structure before installing the chassis into the rack.
CAUTION
Slide/rail mounted equipment is not to be used as a shelf or a workspace.
NOTE
To completely remove the chassis from the rack, you must release the safety tabs on both
sides of the chassis.
14. Re-attach the faceplate by aligning and pushing the faceplate towards the Vertigo XG
chassis.