User's Manual

12 (25)
Installation
3.4 Mounting Plate Dimensions
Figure 4 Mounting plate (back view)
3.5 Mounting
The controller mounts on the supplied mounting plate, which attaches to a standard single
gang box.
To mount the controller
1. If you are connecting power or RS-485 to the controller, use AWG 22 to 24. Run the
wires to the single gang box and then through the wiring hole on the mounting plate (see
Figure 4).
2. Attach the mounting plate to the single gang box using two screws (see Figure 4).
3. Snap the controller on to the mounting plate.
Mounting
hole
Wiring hole
3 41/64” (92 mm)
5 9/64”
(131 mm)
Mounting
hole