Specifications

Industry Canada and FCC Notice

1.0 Industry Canada and FCC Notice

1.1 Notice for all FR-320 Series Built-In UDACTs Sold in Canada

Mircom's FR-320 SERIES BUILT-IN UDACT Communicator described in this manual is

listed by Underwriters Laboratories Canada (ULC) for use in slave application in conjunction

with a Listed FR-320 series Pre-action/Deluge and Agent Release Control Panel under

Standard ULC-S527 (Standard for Control Units for Fire Alarm Systems) and ULC/ORD-C693-

1994 (Central Station Fire Protective Signalling Systems and Services). These

Communicators should be installed in accordance with this manual; the Canadian / Provincial

/ Local Electrical Code; and/or the local Authority Having Jurisdiction (AHJ).

1.1.1 Industry Canada Notice

Repairs to certified equipment should be made by an authorized Canadian maintenance

facility designated by the supplier. Any repairs or alteration made by the user to this

equipment, or equipment malfunctions, may give the telecommunications company cause to

request the user to disconnect the equipment. Users should ensure for their own protection

that the Earth Ground connections of the power utility, telephone lines and internal metallic

water pipe system, if present, are connected together. This is necessary both for proper

operation and for protection.

1.1.2 Notice for all FR-320 Series Built-in UDACTs Sold in the U.S.A.

Mircom's FR-320 SERIES BUILT-IN UDACT Digital Communicator described in this manual

is listed by Underwriters Laboratories Inc. (ULI) for use in slave application in conjunction with

a listed Pre-action/Deluge and Agent Release Control Panel under Standard 864 (Control

Units for Fire Protective Signalling Systems). These Communicators comply with the National

Fire Protection Association (NFPA) performance requirements for DACTs and should be

installed in accordance with NFPA 72 Chapter 4 (Supervising Station Fire Alarm System).

These Communicators should be installed in accordance with this manual; the National

Electrical Code (NFPA 70); and/or the local Authority Having Jurisdiction (AHJ).

1.1.3 FCC Notice

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the

ACTA. On the telco transformer of this equipment is a label that contains, among other

information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number

Caution: Users should not attempt to make such connections themselves, but

should contact the appropriate electric inspection authority, or

electrician, as appropriate

Notes: The Ringer Equivalence Number (REN) assigned to each terminal device

provides an indication of the maximum number of terminals allowed to be

connected to a telephone interface. The termination on an interface may consist

of any combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed 5.

The REN for this product is part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by ## are the REN without a

decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is

separately shown on the label.