Specifications

57
Configuration
• 3. Set password (Command-Menu)
Command Menu/Time Clock
2. Compensation
When value is entered the following message
will appear
Default: 0 seconds
(no compensation)
Compensation values
can range from -15 to
+15 seconds.
Use the up down arrow keys to select daily
compensation value and press ENTER. For
a fast clock adjust negatively. For a slow
clock adjust positively. For example: for a
clock which runs 5 minutes a month (based
on 30 days) fast select -10 seconds.
First choose the level of password to be changed
Then
If the passcode does not match, the following message
appears and the system exit to the main menu
If the passcode is OK the following message appears
and exits to the main menu
0 -> Default
Use this function to change the pass-
code. The minimum number of digits
is 4 and the maximum is 10. Only
numeric digits are allowed.
HH:MM WKD YYYY-MM-DD
00:00 MON 2000-01-01
Daily Compen. (Sec):
Panel Config Updated
Select Access Level
0
Enter new passcode:
Re-enter new passcode:
invalid passcode
passcode updated