Specifications

Configuration

10.9 6. Clear Event Log (Command-Menu)

10.10 7. Dialer Config (Command-Menu)

The following illustration shows the dialer configuration menu. This menu will show up only if

there is a built-in dialer on the main board. Each item in this menu is described below in detail.

Note: Refer to 10.3 How to Use the Keypad to Program the FR-320 on page 49 for

detailed instructions on making menu selections.

Select the type of log to clear. Press the

“ENTER” key. The system will then

confirm before clearing logs.

Press the “ENTER” key to confirm or the

“CANCEL” key to cancel the operation.

Use this function to clear alarm logs, event logs, or both.

Note: Refer to 10.3 How to Use the Keypad to Program the FR-320 on page 49 for

detailed instructions on making menu selections.

-Select Log-

1. Alarm Log

2. General Log

3. All Logs

Clear all the

Selected log(s)? Y

Log(s) cleared