Specifications

62
Configuration
Command Menu-->Dialer Config
10.10.2 Telephone Line
Note: Refer to 10.3 How to Use the Keypad to Program the FR-320 on page 49 for
detailed instructions on making menu selections.
Command Menu/Dialer-Config/Telephone
Line
1. Line#1 Dialing Type
[X] DTMF Dial->Default
[ ] Pulse Dial
Set the dialing type for line #1; this is the
type recognized or preferred by the
telephone company.
Command Menu/Dialer-Config/Telephone
Line
2. Line#2 Dialing Type
[X] DTMF Dial->Default
[ ] Pulse Dial
Same as Line#1.
Command Menu/Dialer-Config/Telephone
Line
3. Line#1 wait for Dial tone
[X] ENABLE ->Default
[ ] DISABLE
Use this function to let the system know
whether or not to wait for a dial tone before
dialing. Cell phone setup for the dialer
requires that the system not wait for dial
tone before dialing.
Command Menu/Dialer-Config/Telephone
Line
4.Line#2 wait for Dial tone
[X] ENABLE ->Default
[ ] DISABLE
Same as Line#1.
i
-Telephone Line-
1. Line1 Dialtype
2. Line2 Dialtype
3. Line1 Dialtone
4. Line2 Dialtone
5. Num of Retries
Line#1 Dialing Type:
[X] DTMF Dial
Line#2 Dialing Type:
[X] DTMF Dial
Line#1 Wait Dialtone
[X] ENABLE
Line#2 Wait Dialtone
[X] ENABLE