Specifications

66
Configuration
10.11.1 Dialer Test Messages
The following messages will display during the test processes of Lines #1 and #2. The
messages that will appear depend on the status of the dialer and the test results that are
found.
This feature flushes all reportable events from the buffer. Press
Enter to reset the dialer. Press Cancel to exit this menu.
The dialer is checking the line for voltage. This message
automatically displays when Manual Test is selected.
No DC line voltage. The line is dead or no phone line is connected.
The dialer is waiting for a dial tone.
This message may indicate a noisy telephone line.
The dial tone was received and telephone number dialing is in
process.
This message indicates that the dialer failed to send a DTMF tone.
Waiting for availability of the receiver. The receiver confirms the
availability by sending an ack tone.
This message indicates that either the telephone number may be
wrong or the receiver is not available.
3. Reset Dialer
Dialer idle now
No DC Volt
Waiting for Dialtone
Failed: No Dialtone
Dialing Receiver Now
No DTMF tone
Waiting for Acktone
Failed no Acktone