Specifications

MIRCOM TECHNOLOGIES LIMITED, 9500 Series: No Subscriber Line Page 36
Press # to access the feature. The display should appear...
-Program Options-
Multi or Single
M=00 S=11 _ _
Please enter choice:
Enter 00 for multiple entrances or 11 for single entrance. The next display should appear...
-Program Options-
* = Abort, # = Store
M=00 S=11 x x
Please enter choice:
Press # to store or * to abort entry. To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL
MODE.
RING CYCLE SELECT (9501A only)
To change the number of Ring Cycles (factory default is 6 cycles), scroll through until you reach the feature as
shown below.
[1=Bck] [3=Fwd]
Do you want to edit
the Ring cycles ?
[*=Abort] [#=Yes]
Press # to access the feature. The display should appear...
-Program Options-
# RING Cycles
00 To 99 Cycl. _ _ <----99 cycles max.
Please enter choice:
Enter the number of ring cycles. The next display should appear...
-Program Options-
* = Abort, # = Store
00 To 99 Cycl. x x
Please enter choice:
Press * to abort or # store entry. To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL
MODE.
SET CLOCK (NOT AVAILABLE - DO NOT USE)
To set the clock, scroll through until you reach the feature as shown below.