Specifications

MIRCOM TECHNOLOGIES LIMITED, 9500 Series: No Subscriber Line Page 39
- Please Wait -
Sorting Residents'/Tenants’ names may take a few minutes depending on the number of names to sort. The next
screen should change to... Performing copy ...
- Please Wait -
When finished, the system should exit to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM
MODE menu to return to NORMAL MODE.
NOTE: Sorting cannot be performed with more than 600 names in a scrolling directory.
SELECT DIGIT FOR HOLD
To select the digit to put the caller on hold, scroll through until you reach the feature as shown below
[1=Bck] [3=Fwd]
Do you want to
Program HOLD?
[*=Abort] [#=Yes]
Press # to select hold digit. The display will be...
[1=Bck] [3=Fwd]
Hold on digit
1,2, or 3 (_)
[*=Abort] [#=Yes]
Type in the digit you require and then press # to store entry or * to abort. To quit, enter *000 while at PROGRAM
MODE menu to return to NORMAL MODE.
* * * * End of Programming * * * *
FIG. 18: 9501A, 9502A, and 9503 CONTROLLER’S RESET PINS & FUSES