Specifications

MIRCOM TECHNOLOGIES LIMITED, 9500 Series: No Subscriber Line Page 41
Code Function Factory
Default
Program Choices
*000 Exit Programming Mode *000 n/a NONE
*101 Enter Resident/Tenant Codes
and Relay Numbers
Blank See worksheet 4 digit resident
code and 4 digit
relay number
*202 Review Resident/Tenant
Codes
Blank See worksheet Up to 4 digits to
review or delete
*303 Enter Keyless Entry Codes Blank See worksheet 4 digits
*404 Review, Delete Keyless
Entry Codes
Blank See worksheet 4 digit code to
review or delete
*505 Change Master Code *999 *___ ___ ___ 3 digits
*606 Change Number of Ring
Cycles
6 cycles ___ ___ cycles 2 digits
*707 Select Door Open Timer 10 seconds ___ ___ seconds 2 digits
*808 Select On Line Timer 60 seconds ___ ___ seconds 2 digits
*909 Select MULTIPLE/SINGLE
Entrance
Multi (00) ___ ___ 00 Multi or
11 Single (2
digits)
*111 Enter 1st 11-digit Telephone
Number
Blank (_) _ _ _ _ _ _ _ _ _
_
4-digit area code
and 7 digit
telephone
number
*222 Enter 2nd 11-digit Telephone
Number
Blank (_) _ _ _ _ _ _ _ _ _
_
4-digit area code
and 7 digit
telephone
number
*333 Auto Programming
Residents’/Tenants’ Dial
Codes
NONE Qty:_ _ _ Code:_ _ _
_
3-digit maximum
resident capacity
4-digit starting
point for resident
codes
*777 Select Digit for Hold 3 __ 1, 2 or 3
"NO MANUAL" MENU DRIVEN PROGRAMMING USING *888
Enter " *888 " to display a help menu.
The screen should appear...
1=Up 3=Down
#=Execute *= Quit
1 and 3 keys are for scrolling up or down the feature menus.
# key is used to access the displayed feature.
* key is used for quit, exit, cancel, or abort.
Press 3 for next menu. The screen should appear...