Operator`s manual

FA-265 Installation and Operator’s Manual
33
8.2 Zone Programming (Section 0)
Program each of the zones as one of the following types. (See “Zone Programming (Section 0)” on page 26.)
Record your programming choices in the table below.
8.3 NAC Temporal/Steady Programming (Section 1)
Please see “Steady” on page 27.
* = Factory default
8.4 NAC Auto-silence, Strobe Programming (Section 2)
Please see “NAC Auto-silence and Strobe Programming - Section 2 (‘NAC2’ LED on steady)” on page 27.
* = Factory default
ZONE
ALARM
LED On
Zone
No.
Type
(00 -
05)
Label
11
22
33
44
55
ZONE
ALARM
LED On
Programming Section
Settings
1 NAC1 Temporal / Steady
Temporal
 *Steady 
2 NAC2 Temporal / Steady
Temporal
 *Steady 
ZONE
ALARM
LED On
Programming Section
Settings
1 NAC Auto-silence
Enabled
 *Disabled 
2 NAC2 Strobe or Bell
Strobe
 *Bell 