Owner's Manual

EIGHT INITIATING CIRCUIT MODULE DM-1008A
General
The DM-1008A Module provides the FA-1000 or
FX-2000 Series Fire Alarm Control panels with
up to 8 Class B (Style B) or 4 Class A (Style D)
Initiating Circuits which can be confi gured for Alarm,
Supervisory, Waterfl ow or Trouble circuits.
Applications
The DM-1008A provides up to eight zones of Class
B (Style B) or four Class A (Style D) Initiating circuits.
Each of the circuits can be confi gured as either
Alarm, Supervisory, Waterfl ow or Trouble zones.
Each circuit can handle both powered devices such
as smoke detectors and non-powered devices such
as heat detectors, pull stations, waterfl ow devices,
tamper switches, etc.
Features
Eight Class B (Style B) or 4 Class A (Style •
D) Initiating Circuits which can be confi gured
as Alarm, Supervisory, Waterfl ow or Trouble
Circuits
Bi-Coloured Alarm/Supervisory and Trouble •
LED provided for individual annunciation of
each zone
Slide-in labels for zone identifi cation•
Programmable as Supervisory Circuit for •
Latching and Non-Latching
All circuits are power limited for use with limited •
energy cable
Removable terminal blocks for ease of wiring •
and servicing
Extensive transient protection on all circuits•
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifi cations and models and also to discontinue models.
Installation
The DM-1008A consists of a PC board which
mounts at the bottom of the chassis. The PC board
is connected via cables to the board on the main
chassis. Space is provided on the dress panel
allowing the application of slide-in labels for initiating
zone description. Labels are provided with each
chassis. Removable terminal blocks are provided for
easy connection of fi eld wiring and servicing.
5622
NOT TO BE USED FOR INSTALLATION PURPOSES.
S7010 S7010
MEA
approved
7135-1477:106
313-97-E
CATALOG NUMBER
firealarmresources.com