Specifications

Configuration and CFG-300 LCD Service Tool
54
Command Menu-->Dialer-Config
Dialer Enable/Disable
Command Menu-->Dialer-Config
Ring Detect
10. Test Dialer (Command-Menu)
Note: Refer to How to Use the Keypad to Program the FA-300 on page 34 for detailed instructions on
making menu selections.
[X] ENABLE ->Default
[ ] DISABLE
The dialer is enabled by
default. When the dialer is
enabled or disabled, a warning
message appears.
Warning: The dialer cannot
report any event to the
monitoring station if it is
disabled.
[ ] Disabled
[ ] 1
[ ] 2
[ ] 3
[ ] 4
[X] 5->Default
[ ] 6
[ ] 7
[ ] 8
Use this menu item to select
the number of rings on which
the panel’s modem will answer.
The default number of rings is
five. The maximum number of
rings you can define is eight.
If you select the “Disabled”
option, the modem will be
disabled and the panel will not
pick up the incoming call.
Press Enter to test Line #1. Press
Cancel to exit this menu. For a
description of test messages, see Dialer
Test Messages on the following page.
Press Enter to test Line #2. Press
Cancel to exit this menu. For a
description of test messages, see Dialer
Test Messages on the following page.
This feature flushes all reportable events
from the buffer. Press Enter to reset the
dialer. Press Cancel to exit this menu.
Dialer Ena/Dis
[X] ENABLE
------Warning-------
Dialer Disabled!!!
[X]5
-Ring Detect Number-
-Dialer Test-
1. L#1 Manual test
2. L#2 Manual test
3. Reset Dialer
1.L#1 Manual test
2.L#2 Manual test
3 Reset Dialer
.