Installation manual

13
Installation
8. Click Next to install the software in the recommended location.
The InstallShield Wizard Complete window appears.
Figure 7 InstallShield Wizard Complete
9. Click Finish.
1.2 Inserting the Wibu key
1. Insert your Wibu key into the computer.
If a Security Key Logon window appears, you must contact your ESD Administrator or
Mircom technical support to upgrade your key. Otherwise, you might not be able to
connect to the FX-3500.
Figure 8 Security Key Logon
1.3 Connecting the Cables
• If you are using a USB cable, go to section 1.3.1 below.
• If you are using a UIMA cable and a serial cable, go to section 1.3.2 on page 15.
• If you are using a telephone cable and modem, go to section 1.3.3 on page 15.