Installation manual

28
Menus
Some commands may be disabled (greyed) depending on what items are selected on the user
interface.
4.5 Panel Menu
The Panel Menu contains the following commands:
Table 4 Edit Menu
Name Short cut Description
Delete Item Del Deletes the currently selected item.
Modify Item
Ctrl+M
If the currently selected item is a row in an editable list, then the first
changeable cell is selected and prepared for editing.
Copy
Ctrl+C
Copies the selected item(s) to the clipboard.
Paste
Ctrl+V
Pastes items from the clipboard to the selected destination.
Paste Special
Ctrl+Shift
+V
Similar to Paste: Opens the Paste Special dialog to allow defaults to
be changed before pasting.
Table 5 Panel Menu
Name Short cut Description
Connect
Ctrl+L
This command will establish a connection between the configuration
tool and the panel, enabling most of the other commands in this
menu. Remember to disconnect when you are finished, as a trouble
will be indicated on the fire alarm panel as long as the laptop is
connected
Send Job Ctrl+S Sends the job to the panel
Get Job
Ctrl+G
Get the job from the panel and store it on the configuration tool's
database. The job becomes the current job, shown in the user
interface.
Panel
Information
Displays detailed information about the panel to which the
configuration tool is connected.
Security Key
Info
Displays a dialog with the security key information such as serial
number, expiry date, number of uses, etc.
Event Log Displays a list of events from the panel.
Upgrade
Firmware
Opens a wizard which guides the user through the firmware upgrade
process.