Installation manual

42
Adding Items to the Job
6.0 Adding Items to the Job
6.1 Add Loop Controllers
To add an ALC-636 Dual Loop Adder
1. Right click anywhere in the Job Tree.
2. Click Add Loop Controller.
3. Loop 2 and Loop 3 will now appear in the Job Tree under Base I/O.
6.2 Add Annunciator
To add an Annunciator
1. Right click anywhere in the Job Tree.
2. Click Add Annunciators.
3. In the Add Annunciator window enter the following information:
4. The dialog remains open for adding more Annunciators. Press Close to dismiss the
dialog.
6.3 Add Correlations
Figure 29 Add Correlations Window
Select Type This control lists the types of Annunciator that can be added to the job.
The list will only shows the types that are allowed for your product type.
Number to
add
Edit this number to add more than one Annunciator to the job.
Tag This field is enabled only if the panel product supports this feature. If
enabled, enter a description for the Annunciator. If more than one
Annunciator is added they will all receive the same tag. Tags can be
edited in the Annunciator Information view.
Add Press Add to add Annunciator(s) of the selected type. The Job Tree will
be updated to show the new Annunciator. If the limit for the job is
exceeded an error message will be displayed.