Installation manual

59
Working with the Panel
9.0 Working with the Panel
9.1 Connect
Figure 42 Connection window
To connect to the panel
1. Select a connection type
:
2. Click Connect. Once a connection has connected you might see the following window
detailing that the panel time and the PC do not match. Click Yes and the update Panel
time window appears.
3. Set the time and click OK.
4. You will be informed that the time has been updated. Click OK.
Direct Serial Select this option if you have connected a serial cable directly
from the serial port (or USB / UIMIA) of your computer to the fire
alarm panel.
Modem Select this option if the fire alarm panel is capable of being
programmed remotely. The combo-box will list the modem(s)
found on your computer.
Telephone Number Enter the phone number to which the fire alarm panel is
connected. The text field will show the last number you entered.